Pages: [1]
« previous next »
Print
Author Topic: Who's is this?  (Read 1837 times)
daryl_wilkinson
Guru's Guru
*****
Offline Offline

Posts: 545



WWW
« on: April 10, 2009, 03:18:55 pm »
Who's is this? http://www.fastcomposites.ca/products/details.php?p=CH01R and what was it like working with a company across the pond?
Logged
ross_burkin
Guru's Guru
*****
Offline Offline

Posts: 595
« Reply #1 on: April 10, 2009, 07:45:44 pm »
My guess is that this has something to do with that Craig guy in Nova Scotia.
Logged
2675 Fuzzy Logic  97/05 rules

Serious plannage in the works...
Will_Lee
Association Member
Guru's Guru
*****
Offline Offline

Posts: 1141
« Reply #2 on: April 11, 2009, 10:18:36 pm »
I didn't know anyone except me had done one with the straight leading edge like that.....
Logged
daryl_wilkinson
Guru's Guru
*****
Offline Offline

Posts: 545



WWW
« Reply #3 on: April 14, 2009, 07:57:55 pm »
Umm.. must be Craig then as it doesn't sound like they have actually done "quite a lot of custom work for the cherub class" as the web page says Wink
Logged
Will_Lee
Association Member
Guru's Guru
*****
Offline Offline

Posts: 1141
« Reply #4 on: April 14, 2009, 10:03:41 pm »
One of the guys is Phil from Philsfoils.
Logged
daryl_wilkinson
Guru's Guru
*****
Offline Offline

Posts: 545



WWW
« Reply #5 on: April 15, 2009, 08:34:50 pm »
umm... I knew the company who made it was 'Phils Foils' just wondered who had ordered one. Are you saying Phil from 'Phils Foils' is making a Cherub?
Logged
Will_Lee
Association Member
Guru's Guru
*****
Offline Offline

Posts: 1141
« Reply #6 on: April 15, 2009, 08:45:37 pm »
No.
Logged
Phil Alderson
Association Member
Guru's Guru
*****
Offline Offline

Posts: 809



WWW
« Reply #7 on: April 16, 2009, 07:28:40 am »
I got a set of T-foil mold plugs made for me by them.
Logged
2683 Pocket Rocket
daryl_wilkinson
Guru's Guru
*****
Offline Offline

Posts: 545



WWW
« Reply #8 on: April 16, 2009, 11:41:55 pm »
Are... cool. Are they good to work with? Did you supply the off sets for the molds or did they have input?
Logged
Phil Alderson
Association Member
Guru's Guru
*****
Offline Offline

Posts: 809



WWW
« Reply #9 on: April 17, 2009, 01:29:42 am »
They were pretty easy to work with, I supplied a 3D cad model of the foil I wanted and they used that to mill the plugs. They gave some good advice on  what needed to be done to make them.
If you want you can get them to do as much of the design work and build work as you want, you just have to pay for their time.
Logged
2683 Pocket Rocket
Pages: [1]
Print
« previous next »
Jump to: