Pages: 1 [2]
« previous next »
Print
Author Topic: Self Tacker Cleats.  (Read 767 times)
Stuberry
Association Member
Guru's Guru
*****
Offline Offline

Posts: 537
« Reply #15 on: September 14, 2011, 07:15:26 pm »
Quote from: Banshee Ambulance on September 14, 2011, 06:27:18 pm
Quote from: stu_tinner on September 13, 2011, 01:23:54 pm
Quote from: Born Slippy on September 13, 2011, 11:42:52 am
I think the one on Strawbs was a good place if the kicker is arranged so that it does not get in the way.

Strawberry's (and Ronin's) kicker attaches to the mast stump.

Thanks Stu, How did that system work out?

It always worked just fine for me.
Logged
daryl_wilkinson
Guru's Guru
*****
Offline Offline

Posts: 545



WWW
« Reply #16 on: September 15, 2011, 01:56:39 pm »
Quote from: Banshee Ambulance on September 12, 2011, 07:00:37 pm
The self tacking jib arrangement on Banshee Ambulance is not really working out, almost to the point that the boat is unsailable. I was wondering if anyone has used a mast swivel type cleat and mounted it on the mast. Provided that you could cleat and uncleat from the rear of the boat I would have thought that would be as good a place as any to put it?

Could you post a picture, it all worked fine when I had it!
Logged
daryl_wilkinson
Guru's Guru
*****
Offline Offline

Posts: 545



WWW
« Reply #17 on: September 15, 2011, 02:09:05 pm »
Does the one you have look like this?
http://www.flickr.com/photos/16146533@N08/6149567011/
Logged
Banshee Ambulance
Guru's Assistant
****
Offline Offline

Posts: 354
« Reply #18 on: September 15, 2011, 06:59:38 pm »
Quote from: daryl_wilkinson on September 15, 2011, 02:09:05 pm
Does the one you have look like this?
http://www.flickr.com/photos/16146533@N08/6149567011/

No, it is larger and does not have a hole up through the middle.
Logged
Ben Howett
Wanabe Guru
**
Offline Offline

Posts: 71
« Reply #19 on: September 15, 2011, 07:00:51 pm »
Quote from: daryl_wilkinson on September 15, 2011, 02:09:05 pm
Does the one you have look like this?
http://www.flickr.com/photos/16146533@N08/6149567011/

That is the same fitting as on Numb (though on a larger post than mine)
Logged
daryl_wilkinson
Guru's Guru
*****
Offline Offline

Posts: 545



WWW
« Reply #20 on: September 15, 2011, 09:44:29 pm »
Quote from: Banshee Ambulance on September 15, 2011, 06:59:38 pm
Quote from: daryl_wilkinson on September 15, 2011, 02:09:05 pm
Does the one you have look like this?
http://www.flickr.com/photos/16146533@N08/6149567011/

No, it is larger and does not have a hole up through the middle.



OK, James Brace has swapped it for the main sheet jammer. Do you have the other acetal plastic mount that goes in the tower?
Logged
Born Slippy
Born Slippy
Association Member
Guru's Guru
*****
Offline Offline

Posts: 974
« Reply #21 on: September 15, 2011, 10:04:17 pm »
As the the boat has obviously had a lot of time spent on it, that explains a mystery.

Rob, If you can get in touch with James I'd propose a swap. The fitting you have is there is worth a lot more than the fitting you want. The one you have is also more likely to be of use to James if he is going onto another single handed boat.
Logged
Pages: 1 [2]
Print
« previous next »
Jump to: