Cherub ForumCherub ChatTech ChatSelf Tacker track shapes
Pages: 1 [2]
« previous next »
Print
Author Topic: Self Tacker track shapes  (Read 4716 times)
rich_taylor
Association Member
Newb
*
Offline Offline

Posts: 24
« Reply #15 on: January 30, 2008, 08:03:06 pm »
nothing to say, just a quick test
Logged
rich_taylor
Association Member
Newb
*
Offline Offline

Posts: 24
« Reply #16 on: January 30, 2008, 08:04:38 pm »
Oooooooooo!
it works....!
Logged
phil_kirk
Association Member
Guru's Guru
*****
Offline Offline

Posts: 1263
« Reply #17 on: February 01, 2008, 01:08:54 pm »
A bit radical but logical is to step the mast on an A frame/ quad-r-pod with the four legs on the gunnel and meeting together at the gooseneck.  This would effectively be 4 solid lowers of a larger diameter than we currently use with 2 legs replacing the lowers and two other legs going forward slightly. A standard curved track could then be mounted with the ends level with the mast and the centre behind the mast position.

problem over!

Pole problems over too.
I'm sure that idea will start a few other problems though.
Logged
Pages: 1 [2]
Print
« previous next »
Jump to: